Difference between revisions of "CGS mixer and ETI 4600 VCA"

Jump to navigation Jump to search
m (Text replacement - "w_/http" to "/http")
Line 13: Line 13:
   
 
== References ==
 
== References ==
''[https://web.archive.org/web/20030525111920fw_/http://www.cgs.synth.net/modules/vca.html VCA for music synthesizers.]'' (archived) by Ken Stone, 1999, with permission of the author
+
''[https://web.archive.org/web/20030525111920f/http://www.cgs.synth.net/modules/vca.html VCA for music synthesizers.]'' (archived) by Ken Stone, 1999, with permission of the author
   
 
== External links ==
 
== External links ==

Revision as of 18:42, 3 June 2019

Cgs panel vca.jpg
Panel artwork. Click through for larger version. Print at 200 DPI.

The CGS mixer and ETI 4600 VCA module is the combination of two sub modules, a mixer and a voltage controlled amplifier.

For the construction details of the mixer, see the CGS DC mixer (previous version). In this case, only two inputs are used, and there is no overall gain control. The output is fed both to the output socket and the switched input of the VCA signal input (normalised connection).

The VCA itself is the VCA/Ring Modulator from the International 4600 (Maplin 4600).

Two have been constructed, and there is a third waiting for a panel. Two of these VCA boards were hand etched, and the third was one of the boards from the 3800.

See also

References

VCA for music synthesizers. (archived) by Ken Stone, 1999, with permission of the author

External links