Difference between revisions of "Connectors"

Jump to navigation Jump to search
(Molex KK 0.1” headers are for the normalising bus)
 
(54 intermediate revisions by 4 users not shown)
Line 1: Line 1:
In the UK, the terms ''jack plug'' and ''jack socket'' are commonly used for the respective male and female connectors.<ref>''Radio Production'' by Robert McLeish, Newnes, 2005, ISBN 0-240-51972-8</ref> In the US the more fixed connector is called a jack.<ref>''Reference Designations for Electrical and Electronics Parts and Equipment'', ASME Y14.44-2008, ASME, Fairfield, 2008, Section 2.1.5.3</ref>
+
In the UK, the terms ''jack plug'' and ''jack socket'' are commonly used for the respective male and female connectors.<ref>''Radio Production'' by Robert McLeish, Newnes, 2005, {{ISBN|0-240-51972-8}}</ref> In the US the more fixed connector is called a jack.<ref>''Reference Designations for Electrical and Electronics Parts and Equipment'', ASME Y14.44-2008, ASME, Fairfield, 2008, Section 2.1.5.3</ref>
   
==Patching==
+
== Caution ==
  +
[[File:Vertical mount Erthenvar jack.jpg|thumb|right|100px|Vertical mount 3.5mm switching phone jack, commonly known as Flight of Harmony or Erthenvar jack.]]Do not mix mating connectors of different metals. The [[contact resistance]] will go up with dissimilar metals, causing all sorts of problems.<ref>[http://www.pinrepair.com/connect/ Molex Connectors Explained, as used in Pinball.]</ref>
The jacks and plugs commonly used for creating [[synthesizer patches]] are the 1/4" (exactly 6.35 mm), the 3.5mm (approx 1/8"), the banana and the 0.141" (3.58mm) [http://www.switchcraft.com/Category.aspx?Parent=60 Tini-Jax], these are all [[monophonic]].
 
   
==Midi==
+
== Front panel ==
  +
{{main|Jacks}}
[[MIDI]] cables terminate in a five pin 180° DIN connector. Standard applications use only three of the five conductors: a ground wire, and a [[balanced pair]] of conductors that carry a +5 Volt signal. Some proprietary applications, such as phantom-powered footswitch controllers, use the spare pins for DC power.<ref>''[http://www.soundonsound.com/sos/dec01/articles/tcgmajor.asp TC Electronic G Major]'' by Dave Lockwood, Sound On Sound, December 2001.</ref> [[Opto-isolator]]s keep MIDI devices electrically separated from their connectors, which prevents [[ground loops]] from occurring.<ref>''Digital Theory'' by Allen Mornington-West, Sound Recording Practice, 4th edition, Edited by John Borwick, Oxford University Press, 1996.</ref>
 
  +
[[File:Emerson banana jack.jpg|thumb|right|100px|The type of banana jack socket used on Buchla and Serge synths.]]The jacks and plugs commonly used for creating [[synthesizer patches]] are the 1/4" (exactly 6.35mm) and the 3.5 mm (approx 1/8 inch) mono phone connectors – also known as [https://en.wikipedia.org/wiki/Phone_connector_(audio) TS connectors] (for tip sleeve), the 4 mm banana and the 0.141 inch (3.58 mm) [http://www.switchcraft.com/Category.aspx?Parent=60 Tini-Jax], these are all [[monophonic]]. The reliable and solid feeling 4.40 mm Bantam or TT (tiny telephone) jacks, widely used in professional audio, are an option offered by [[Wiard Synthesizer Company|Wiard]] and [[Hinton Instruments]].<ref>[http://www.wiard.com/modular/300series/bantam.htm Bantam (TT) Jacks]</ref><ref>{{Cite web |url=http://hinton-instruments.co.uk/wp/2012/12/20/bantam-jack-patching/ |title=Bantam Jack Patching |accessdate=2014-07-19 |archiveurl=https://web.archive.org/web/20161231165452/http://hinton-instruments.co.uk/wp/2012/12/20/bantam-jack-patching/ |archivedate=2016-12-31 |deadurl=yes |df= }}</ref>
   
  +
=== Banana plugs vs. other plugs ===
==External DC connector==
 
  +
[[File:Tini-Jax socket for Buchla.jpg|thumb|right|100px|0.141 inch audio jack socket as used on Buchla modular systems.]]Banana are unshielded but CVs don't need shielding and because audio levels are usually high, this won't be a problem. When patching into external synths or other devices use a shielded cable with both ends of the shield connected to ground. Banana sockets are cheaper because they are mechanically simpler. They are also much more durable since there is less to go wrong. They are widely available and come in a range of colours.<ref group="note">For example [[Serge Modular Music Systems|Serge]] use red to indicate logic, (triggers, gates, and other positive-going pulses), blue for positive only control voltages, black for audio signals, and violet for synchronisation.</ref><ref name="mw">[https://www.modwiggler.com/forum/viewtopic.php?t=44407&start=all&postdays=0&postorder=asc Banana plugs vs. other plugs] on Mod Wiggler forum</ref>
  +
  +
With banana jacks you can patch live without the noises caused by patch cables momentarily connecting to ground.<ref>[https://www.facebook.com/groups/synthdiy/permalink/10155197448896313/?comment_id=10155197653056313 comment]
  +
in Synth DIY, Facebook group.</ref>
  +
  +
Banana plugs are stackable i.e. one can plug into the end of another. Most banana synths are designed with stackable plugs in mind, whereas most 1/4" and 3.5mm jack systems include [[multiple]]s.<ref name="mw" />
  +
  +
On [[Buchla Electronic Musical Instruments|Buchla]] synthesizers the audio and contol paths and control are kept separate. The control path uses EF Johnson banana jacks and swings between +/-15V, while the audio path is at 1.228V RMS, (+4dBu professional line level) and uses 0.141" Tini-Jax.<ref name="wb">[http://buchlatech.blogspot.co.uk/2008/10/why-buchla.html Why Buchla?], Buchla tech blog, 4 Oct 2008</ref><ref name="as">[http://buchlatech.blogspot.co.uk/2008/10/good-thing-about-standards-so-many-to.html The Good Thing About Standards: So Many To Choose From], Buchla Tech blog, 7 October 2007</ref>
  +
  +
Regular jacks provide an extra switched connection enabling [[Modular synthesizer#Normalised synthesizer|normalization]] (connections when there is no cable plugged in).
  +
  +
== Midi ==
 
[[MIDI]] cables terminate in a five pin 180° DIN connector. Standard applications use only three of the five conductors: a ground wire, and a [[balanced pair]] of conductors that carry a +5 Volt signal. Some proprietary applications, such as phantom-powered footswitch controllers, use the spare pins for DC power.<ref>''[https://web.archive.org/web/20120320113908/http://www.soundonsound.com/sos/dec01/articles/tcgmajor.asp TC Electronic G Major]'' by Dave Lockwood, Sound On Sound, December 2001.</ref> [[Opto-isolator]]s keep MIDI devices electrically separated from their connectors, which prevents [[ground loops]] from occurring.<ref>''Digital Theory'' by Allen Mornington-West, Sound Recording Practice, 4th edition, Edited by John Borwick, Oxford University Press, 1996.</ref>
  +
 
== External DC connector ==
 
The coaxial power connector is the miniature power connector used for attaching extra-low voltage devices such as consumer electronics to external power supplies. Also known as barrel connectors, concentric barrel connectors or tip connectors, these small cylindrical connectors come in a variety of sizes.
 
The coaxial power connector is the miniature power connector used for attaching extra-low voltage devices such as consumer electronics to external power supplies. Also known as barrel connectors, concentric barrel connectors or tip connectors, these small cylindrical connectors come in a variety of sizes.
   
==Internal DC power supply==
+
== Internal DC power supply ==
===3U===
+
=== Eurorack ===
For internal power distribution, a [[Eurorack]] case typically has a distribution board with 10-pin IDC headers. The 16 pin IDC used by [[Doepfer]] includes +5 Volts, [[CV/gate|Gate and CV]] as used by a few modules to pass these signals between modules without needing extra patch cables. The power cable is typically a length of ribbon cable with a female 16-pin IDC connector on one end and a 10-pin on the other. Incorrectly connecting one of these connectors can damage the module. The stripe on the ribbon cable indicates the -12V side of the connectors.<ref>[http://www.division-6.com/learn/eurorack-power.php Eurorack Power Cables]</ref><!-- Frac rack modules such as those from PAiA and Blacet use the MTA-156 connector.-->
+
For internal power distribution, a [[Eurorack]] case typically has a distribution board with 16 pin headers. With [[Doepfer]] these also includes +5 Volts, and [[CV/gate|Gate and CV]] which are used by a few modules to [[normalise]] these signals. The power cable is typically a length of ribbon cable with a female 16-pin IDC connector on one end and a 10-pin on the other. Incorrectly connecting one of these connectors can damage the module. The stripe on the ribbon cable indicates the -12V side of the connectors.<ref>{{Cite web |url=http://www.division-6.com/learn/eurorack-power.php |title=Eurorack Power Cables |accessdate=2013-03-01 |archiveurl=https://web.archive.org/web/20130909050750/http://www.division-6.com/learn/eurorack-power.php |archivedate=2013-09-09 |deadurl=yes |df= }}</ref><!-- Frac rack modules such as those from PAiA and Blacet use the MTA-156 connector.-->
   
''See also [[Comparison of 3U modules]]''
+
''See also [[Eurorack]]''
   
===5U===
+
=== 5U ===
To distribute DC from the [[power supply]] to the modules [[MOTM]] and [[Oakley]] implement a [[power bus]] with MTA-156 headers.<ref>[http://www.oakleysound.com/dizzy3-bg.pdf Dizzy User Manual and Builders Guide] v3.2.0 by Tony Allgood</ref> [[Synthesizers.com]] implements a DC [[cable harness]]. The harness connects to the power supply by a a 4 pin .093 Molex connector while six pin keyed MTA-100 connectors on the harness connect to male headers on the modules, with +/-15V, +5V and a ground shared between these.<ref>Synthesizers.com, Power System Components, [http://www.synthesizers.com/q101.html#qdh DC Power Harnesses]</ref><!-- CoTK Curetronic Modcan etc. -->
+
To distribute DC from the [[power supply]] to the modules [[Synthesis Technology|MOTM]] and [[Oakley Sound Systems]] implement a [[star distribution]] with 4 way [[MTA|AMP MTA-156]] headers or 4 way [[Molex KK]] 0.156" headers on a [[PCB]].<ref>[http://www.oakleysound.com/dizzy3-bg.pdf Dizzy User Manual and Builders Guide] v3.2.0 by Tony Allgood</ref> The [[CGS]] uses a [[power bus|power distribution bus]].<ref>CGS, [https://web.archive.org/web/20150311164252/http://www.cgs.synth.net/modules/cgs74_bus.html Power Bus Board]</ref>
   
  +
[[Modcan]] and [[Cyndustries]] have the same type of connector as MOTM to distribute power to modules except they only use a 3 pin version which provides +/-15v only. Power is also distributed from the power supply via a bus board.<ref name="mw1739">[https://www.modwiggler.com/forum/viewtopic.php?t=1739 Power distribution – updated], Mod Wiggler forum, Sep 2008</ref>
''See also [[Comparison of 5U modules]]''
 
<!-- ===Buchla, 4U and others=== -->
 
   
  +
[[Synthesizers.com]] implements a DC star distribution via [[cable harness]], connected to the power supply by a 4 pin .093 Molex connector while six pin keyed MTA-100 connectors on the harness connect to male headers on the modules, with +/-15V, +5V and a ground shared between these.<ref>Synthesizers.com, Power System Components, [http://www.synthesizers.com/q101.html#qdh DC Power Harnesses]</ref><!-- CoTK Curetronic Modcan etc. -->
==References==
 
{{Reflist}}
 
   
 
''See also [[Comparison of 5U module brands]]''
==External links==
 
  +
*Aaron Lanterman's [http://users.ece.gatech.edu/~lanterma/buchla/notes.html Notes on making Buchla-compatible stuff]
 
  +
=== Loudest Warning ===
*Wikipedia:[http://en.wikipedia.org/wiki/Phone_connector_(audio) Phone connector (audio)]
 
  +
[[Loudest Warning]] aka CLee suggest a power bus with 0.100" (2.54mm) 4 pin through hole connector keyed headers (Digi-Key part [https://www.digikey.co.uk/products/en?keywords=WM4202-ND WM4202-ND], Molex 22232041). The flying leads, soldered to the PCB connect to the bus via 4 pin 0.100" (2.54mm) connector housing (Digi-Key part [https://www.digikey.co.uk/products/en?keywords=WM2002-ND WM2002-ND], Molex 0022013047) and [[Crimping|crimped]] pins (Digi-Key part [https://www.digikey.co.uk/products/en?keywords=WM2756-ND WM2756-ND], Molex 8650805).<ref>[http://clsound.com/Resources/BOM%20for%204U%20Boat.pdf BOM 4U LW Format Boat]</ref>
*Wikipedia:[http://en.wikipedia.org/wiki/Banana_plug Banana connector]
 
  +
*Wikipedia:[http://en.wikipedia.org/wiki/Coaxial_power_connector Coaxial power connector]
 
  +
=== Other formats ===
  +
[[Frac rack|Frac]] and Wiard 300 series use the same 4 way MTA-156 connectors as 5U MOTM.
  +
  +
== Notes ==
  +
{{reflist|group="note"}}
  +
 
== References ==
 
{{Reflist}}
   
 
== External links ==
[[Category:Hardware]]
 
 
* Aaron Lanterman's [http://users.ece.gatech.edu/~lanterma/buchla/notes.html Notes on making Buchla-compatible stuff]
 
* Wikipedia:[http://en.wikipedia.org/wiki/Phone_connector_(audio) Phone connector (audio)]
 
* Wikipedia:[http://en.wikipedia.org/wiki/Banana_plug Banana connector]
 
* Wikipedia:[http://en.wikipedia.org/wiki/Coaxial_power_connector Coaxial power connector]
  +
* [http://www.davidschwan.com/Pages/synthesizers.html Synthesizer panels using bannana sockets]
  +
* [https://helpful.knobs-dials.com/index.php/Common_plugs_and_connectors Common plugs and connectors]
  +
=== Power connectors ===
  +
* [https://www.modwiggler.com/forum/viewtopic.php?t=1739&start=all&postdays=0&postorder=asc Power distribution] thread at Mod Wiggler forum
  +
* Supplier part numbers for MOTM [http://www.hotrodmotm.com/parts_list.htm 4 pin 0.156 MTA]
  +
* Supplier part numbers for Synthesizers.com [http://www.synthesizers.com/technical.html#internaldc 6 pin .100 MTA]
  +
* Oakley Sound Systems' [http://www.oakleysound.com/construct.pdf Construction Guide] has a comparison between MTA and Molex connectors.
 
[[Category:Connectors]]

Latest revision as of 22:32, 10 June 2021

In the UK, the terms jack plug and jack socket are commonly used for the respective male and female connectors.[1] In the US the more fixed connector is called a jack.[2]

Caution

Vertical mount 3.5mm switching phone jack, commonly known as Flight of Harmony or Erthenvar jack.

Do not mix mating connectors of different metals. The contact resistance will go up with dissimilar metals, causing all sorts of problems.[3]

Front panel

Main article: Jacks
The type of banana jack socket used on Buchla and Serge synths.

The jacks and plugs commonly used for creating synthesizer patches are the 1/4" (exactly 6.35mm) and the 3.5 mm (approx 1/8 inch) mono phone connectors – also known as TS connectors (for tip sleeve), the 4 mm banana and the 0.141 inch (3.58 mm) Tini-Jax, these are all monophonic. The reliable and solid feeling 4.40 mm Bantam or TT (tiny telephone) jacks, widely used in professional audio, are an option offered by Wiard and Hinton Instruments.[4][5]

Banana plugs vs. other plugs

0.141 inch audio jack socket as used on Buchla modular systems.

Banana are unshielded but CVs don't need shielding and because audio levels are usually high, this won't be a problem. When patching into external synths or other devices use a shielded cable with both ends of the shield connected to ground. Banana sockets are cheaper because they are mechanically simpler. They are also much more durable since there is less to go wrong. They are widely available and come in a range of colours.[note 1][6]

With banana jacks you can patch live without the noises caused by patch cables momentarily connecting to ground.[7]

Banana plugs are stackable i.e. one can plug into the end of another. Most banana synths are designed with stackable plugs in mind, whereas most 1/4" and 3.5mm jack systems include multiples.[6]

On Buchla synthesizers the audio and contol paths and control are kept separate. The control path uses EF Johnson banana jacks and swings between +/-15V, while the audio path is at 1.228V RMS, (+4dBu professional line level) and uses 0.141" Tini-Jax.[8][9]

Regular jacks provide an extra switched connection enabling normalization (connections when there is no cable plugged in).

Midi

MIDI cables terminate in a five pin 180° DIN connector. Standard applications use only three of the five conductors: a ground wire, and a balanced pair of conductors that carry a +5 Volt signal. Some proprietary applications, such as phantom-powered footswitch controllers, use the spare pins for DC power.[10] Opto-isolators keep MIDI devices electrically separated from their connectors, which prevents ground loops from occurring.[11]

External DC connector

The coaxial power connector is the miniature power connector used for attaching extra-low voltage devices such as consumer electronics to external power supplies. Also known as barrel connectors, concentric barrel connectors or tip connectors, these small cylindrical connectors come in a variety of sizes.

Internal DC power supply

Eurorack

For internal power distribution, a Eurorack case typically has a distribution board with 16 pin headers. With Doepfer these also includes +5 Volts, and Gate and CV which are used by a few modules to normalise these signals. The power cable is typically a length of ribbon cable with a female 16-pin IDC connector on one end and a 10-pin on the other. Incorrectly connecting one of these connectors can damage the module. The stripe on the ribbon cable indicates the -12V side of the connectors.[12]

See also Eurorack

5U

To distribute DC from the power supply to the modules MOTM and Oakley Sound Systems implement a star distribution with 4 way AMP MTA-156 headers or 4 way Molex KK 0.156" headers on a PCB.[13] The CGS uses a power distribution bus.[14]

Modcan and Cyndustries have the same type of connector as MOTM to distribute power to modules except they only use a 3 pin version which provides +/-15v only. Power is also distributed from the power supply via a bus board.[15]

Synthesizers.com implements a DC star distribution via cable harness, connected to the power supply by a 4 pin .093 Molex connector while six pin keyed MTA-100 connectors on the harness connect to male headers on the modules, with +/-15V, +5V and a ground shared between these.[16]

See also Comparison of 5U module brands

Loudest Warning

Loudest Warning aka CLee suggest a power bus with 0.100" (2.54mm) 4 pin through hole connector keyed headers (Digi-Key part WM4202-ND, Molex 22232041). The flying leads, soldered to the PCB connect to the bus via 4 pin 0.100" (2.54mm) connector housing (Digi-Key part WM2002-ND, Molex 0022013047) and crimped pins (Digi-Key part WM2756-ND, Molex 8650805).[17]

Other formats

Frac and Wiard 300 series use the same 4 way MTA-156 connectors as 5U MOTM.

Notes

  1. ^ For example Serge use red to indicate logic, (triggers, gates, and other positive-going pulses), blue for positive only control voltages, black for audio signals, and violet for synchronisation.

References

  1. ^ Radio Production by Robert McLeish, Newnes, 2005, ISBN 0-240-51972-8
  2. ^ Reference Designations for Electrical and Electronics Parts and Equipment, ASME Y14.44-2008, ASME, Fairfield, 2008, Section 2.1.5.3
  3. ^ Molex Connectors Explained, as used in Pinball.
  4. ^ Bantam (TT) Jacks
  5. ^ "Bantam Jack Patching". Archived from the original on 2016-12-31. Retrieved 2014-07-19. 
  6. ^ a b Banana plugs vs. other plugs on Mod Wiggler forum
  7. ^ comment in Synth DIY, Facebook group.
  8. ^ Why Buchla?, Buchla tech blog, 4 Oct 2008
  9. ^ The Good Thing About Standards: So Many To Choose From, Buchla Tech blog, 7 October 2007
  10. ^ TC Electronic G Major by Dave Lockwood, Sound On Sound, December 2001.
  11. ^ Digital Theory by Allen Mornington-West, Sound Recording Practice, 4th edition, Edited by John Borwick, Oxford University Press, 1996.
  12. ^ "Eurorack Power Cables". Archived from the original on 2013-09-09. Retrieved 2013-03-01. 
  13. ^ Dizzy User Manual and Builders Guide v3.2.0 by Tony Allgood
  14. ^ CGS, Power Bus Board
  15. ^ Power distribution – updated, Mod Wiggler forum, Sep 2008
  16. ^ Synthesizers.com, Power System Components, DC Power Harnesses
  17. ^ BOM 4U LW Format Boat

External links

Power connectors