Passive mult

Revision as of 12:02, 20 January 2020 by Rob Kam (talk | contribs)
Jump to navigation Jump to search

The passive mult is probably the easiest module to possibly build, all you need is some jacks, some wire, and a soldering iron. This module allows you to split a signal to be sent to multiple destinations. Passive mults are not suitable for V/octave CV control, because the voltage may drop when split, due to varying impedance in the destinations.

Circuit

Simply wire all jack tips together, and all barrels together. More complex designs can use switched jacks to split multiples into smaller sub-groups.

External links

References

This page uses material from Simple synth DIY, which is released under the Creative Commons Attribution-Share-Alike License 3.0. The history of that page before 3 July 2019 serves as the attribution history for the contents of this page before then.