Difference between revisions of "Eurocard"

Jump to navigation Jump to search
Line 13: Line 13:
  
 
==See also==
 
==See also==
[[Panels]]
+
[[Panels (homebrew)|Panels]]
  
 
==References==
 
==References==

Revision as of 23:09, 11 January 2016

Eurocard is a European standard format for PCBs, which can be plugged together into a standardized subrack. The subrack consists of a series of slotted card guides on the top and bottom, into which the cards are slid so they stand on end, like books on a shelf. At the "back" of each card is one or more connectors, which plug into mating connectors on a backplane in the rear of the subrack.[1]

The format does not define specific connectors to be used nor the signals that are assigned to connector contacts.[1]

The format is in widespread use in many industries,[1] and is also the basis of the Eurorack format for modular synthesizers, popularized by Doepfer and other manufacturers.

Dimensions

The Eurocard height is specified in U (for rack unit), with 1 U being 1.75 inches. In practice heights are commonly 3U or 6U.[1]

Eurocards come in depths that start at 100mm and then increase in 60mm increments. The 160 millimetres depth is the most common today, followed by 220mm. However standard hardware is available to accommodate depths from 100mm to 400mm.[1]

A single size eurocard is 100mm x 160mm (3U) and double size eurocard is 233.35mm x 160mm (6U).[1] The extra 33.35mm allows two 3U Eurocards to be supported properly next to one 6U high, with the width taken up by a card guide between the two 3U cards.

See also

Panels

References