Difference between revisions of "MU DIY parts"

From Synth DIY wiki
Jump to navigation Jump to search
Line 120: Line 120:
 
==PCB/Panel Mounting==
 
==PCB/Panel Mounting==
  
===MOTM===
+
===MOTM PCB Mounting===
 
====PCB Mounting Brackets====
 
====PCB Mounting Brackets====
 
MOTM PCBs are generally mounted perpendicular to the panel with L-shaped brackets affixed to pots or jacks.
 
MOTM PCBs are generally mounted perpendicular to the panel with L-shaped brackets affixed to pots or jacks.
Line 130: Line 130:
 
Details on Stooge brackets: http://www.wiseguysynth.com/larry/brackets/modular_brackets.htm
 
Details on Stooge brackets: http://www.wiseguysynth.com/larry/brackets/modular_brackets.htm
  
===MU===
+
===MU PCB Mounting===
 
Synthesizers.com and some 3rd party manufacturers mount the PCB parallel to the panel with standoffs.  Other 3rd party manufacturers mount PCBs perpendicular MOTM-style.  #4-40 mounting hardware is ideal, and works with CGS boards too.
 
Synthesizers.com and some 3rd party manufacturers mount the PCB parallel to the panel with standoffs.  Other 3rd party manufacturers mount PCBs perpendicular MOTM-style.  #4-40 mounting hardware is ideal, and works with CGS boards too.
  

Revision as of 17:14, 5 June 2011

If you have any corrections or additions to this list, feel free to make them here, or send a PM to diophantine on the MuffWiggler forum.

Panels/Faceplates

MOTM Panels

Panel Specs

...

Blank Panels

Blank panels can be purchased from:

Project Panels

Panels for specific projects (CGS, I. Fritz, etc.) can be purchased from:

Custom Panels

Custom panels can be manufactured by:

MU Panels

Panel Specs

Details can be found here: http://www.synthesizers.com/technical.html#panels

Blank Panels

Blank panels can be purchased from:

Project Panels

Panels for specific projects (CGS, YuSynth, etc.) can be purchased from:

Custom Panels

Custom panels can be manufactured by:

(Note: for FPE/Schaeffer, you need to supply a blank MU panel.)

Panels Parts

MOTM Panel Parts

A very extensive list can be found here: http://www.hotrodmotm.com/parts_list.htm

Knobs

MOTM uses ALCO PKES90B1/4 knobs.

Available at:

Pots

MOTM uses Spectrol 149 pots.

Available at:

Switches

...

Pushbuttons

...

Jacks

MOTM uses Switchcraft 112A 1/4" jacks.

LEDs

...

MU Panel Parts

Knobs

Dotcom uses fluted dual-dot 1" Moog-style knobs.

Available at:

For pointer knobs, Dotcom uses 1.125" Moog-style pointer knobs.

Available at:

Pots

Synthesizers.com uses Alpha single-gang 24mm pots.

Available at:

Switches

Available at:

Pushbuttons

Available at:

Jacks

Dotcom modules use enclosed Switchcraft-style jacks.

Available at:

Of course, other open-frame 1/4 jacks can be used (and are used by 3rd party manufacturers), and are especially handy for normalizing jack connections.

LEDs

...

Note: Panel components sold by Synthesizers.com come with 6" wires and MTA connected.

PCB/Panel Mounting

MOTM PCB Mounting

PCB Mounting Brackets

MOTM PCBs are generally mounted perpendicular to the panel with L-shaped brackets affixed to pots or jacks.

Available at:

Details on Stooge brackets: http://www.wiseguysynth.com/larry/brackets/modular_brackets.htm

MU PCB Mounting

Synthesizers.com and some 3rd party manufacturers mount the PCB parallel to the panel with standoffs. Other 3rd party manufacturers mount PCBs perpendicular MOTM-style. #4-40 mounting hardware is ideal, and works with CGS boards too.

PCBs can be mounted parallel using 1" (Mouser: 534-8405) and 1.25" (Mouser: 534-8407) threaded standoff posts.

Black oxide screws, like the ones used by Synthesizers.com, are used to affix the standoffs to the front panel. Specifically, #4-40 x 3/8" Black oxide phillips pan head screws. [1]

Screws available here: http://www.aaronsmachinescrews.com/cfusion/DisplayProduct.cfm?ITEM=1701SN1368

For perpendicular mounting, brackets as mentioned in the MOTM section can be used, or threaded right-angle brackets (Mouser: 534-621) can be mounted to the panel, using the same screws mentioned above. [2]

Internal Connectors

MOTM

Module Power

4-pin MTA-156 connectors

Pinout:

  • 1 = +15V
  • 2 = GND
  • 3 = GND
  • 4 = -15V

MU

Module Power

Dotcom modules and power supplies are connected using 6-pin keyed MTA-100 connectors. [3]

Pinout:

  • 1 = +15v (White)
  • 2 = KEY - pin missing and plugged
  • 3 = +5v (Red)
  • 4 = gnd (Black)
  • 5 = -15v (Green)

Female 24AWG cable mount: AMP #6404416 (Mouser: 571-3-640441-6)

Male PCB mount: AMP #6404566 (Mouser: 571-6404566)

Panel Connectors

2-pin MTA-100 connectors are used for jacks, push-buttons, and LEDs.

Jack Pinout:

  • 1 = Signal (tip)
  • 2 = Ground (ring)

Female cable mount: AMP #6404412 (Mouser: 571-3-640441-2)

Male PCB mount: AMP #6404562 (Mouser: 571-6404562)

3-pin MTA-100 connectors are used for switches and pots.[4]

Potentiometer Pinout:

  • 1 = CCW Side
  • 2 = Wiper
  • 3 = CW Side

Female cable mount: AMP #6404413 (Mouser: 571-3-640441-3)

Male PCB mount: AMP #6404563 (Mouser: 571-6404563)

MTA-100 connectors with more pins can be found with similar part numbers.

Additional Details

MTA-100 connectors use 24 awg wire.

MTA-100 "T"-handle tool: AMP #59803-1 (DigiKey: A9982-ND)

Additional Resources

Online resources

DIY builder sites:

Muffwiggler threads

... To Be Compiled ...

Notes

  • I'm not wanting to do a list of every possible panel part or knob (everyone has preferences), but to list the common/major/most-wanted parts in these formats, and/or what sort of things will work. I'd love to eventually list the sizes and have templates/sizes for panel design too.

References