Difference between pages "Jumper" and "File:8c58ae2d322a33f3036800d96db0e91a.png"

(Difference between pages)
Jump to navigation Jump to search
(== Summary == Importing file)
Line 1: Line 1:
== Summary ==
The most common type of '''jumper''' is a small plastic tab containing two sockets spaced 0.1 inch (2.5 mm) apart. The jumper fits over and shorts together pins on a [[pin header|header]] fitted to the [[PCB]]. It acts as a low-cost substitute for a switch, where the connection needs to be made only rarely made. A [[DIP switch]] performs the same function. There is no standard schematic symbol to represent a jumper.<ref>''Make: Encyclopedia of Electronic Components Volume 1: Resistors, Capacitors, Inductors, Switches, Encoders, Relays, Transistors'' by Charles Platt, Publisher: Maker Media Inc, 2012, ISBN 1449333893</ref>
Importing file
== See also ==
* [[Wire link]]
== References ==
== External links ==
* Wikipedia:[https://en.wikipedia.org/wiki/Jumper_(computing) Jumper (computing)]
=== Suppliers ===
* [http://cpc.farnell.com/c/cable-leads-connectors/connectors/pcb-connectors/pcb-shorting-links PCB Shorting Links], CPC

Latest revision as of 19:48, 17 April 2021


Importing file