Difference between pages "Jacks and plugs" and "James Husted"

(Difference between pages)
Jump to navigation Jump to search
(Rob Kam moved page Jacks and plugs to Connectors)
 
(Created page with "'''James Husted''' is the designer at Synthwerks. He studied fine art and drafting at Western Washington University. There he managed the synthesizer studio, which had an...")
 
Line 1: Line 1:
  +
'''James Husted''' is the designer at [[Synthwerks]]. He studied fine art and drafting at Western Washington University. There he managed the synthesizer studio, which had an [[Arp 2500]], and taught the hardware aspects. For about 25 years and for over 60 products he was the graphics department at [http://www.symetrix.co/ Symetrix]. There he was involved in every aspect of manufacturing from etching and drilling PCB's, screen printing front panels, assembly and stock control. He then was the graphic designer at Digital Harmony.<ref name="em">[http://www.electronicmusic.com/features/interview/synthwerks.html#sthash.hBy8na1n.dpuf Synthwerks Interview] by Paul Clark, ElectronicMusic.com, Jan. 2010</ref>
#REDIRECT [[Connectors]]
 
  +
  +
His first synth was a [[EMS VCS3]] in 1974, he modified a few Oberheim SEM based systems. His explorations were slowed down by the trend towards single keyboard units and the move to [[digital]], until he found out about Eurorack modular synths and decided to start his own business making synthesizer modules.<ref name="em"/>
  +
  +
== References ==
  +
{{reflist}}
  +
  +
== External links ==
  +
* [http://www.synthwerks.com/ Synthwerks LLC]
  +
* [http://www.ersatzplanet.com/ The ERSATZ Planet]
  +
  +
{{DEFAULTSORT:Husted, James}}
  +
[[Category:Designers]]

Revision as of 14:16, 2 October 2016

James Husted is the designer at Synthwerks. He studied fine art and drafting at Western Washington University. There he managed the synthesizer studio, which had an Arp 2500, and taught the hardware aspects. For about 25 years and for over 60 products he was the graphics department at Symetrix. There he was involved in every aspect of manufacturing from etching and drilling PCB's, screen printing front panels, assembly and stock control. He then was the graphic designer at Digital Harmony.[1]

His first synth was a EMS VCS3 in 1974, he modified a few Oberheim SEM based systems. His explorations were slowed down by the trend towards single keyboard units and the move to digital, until he found out about Eurorack modular synths and decided to start his own business making synthesizer modules.[1]

References

  1. ^ a b Synthwerks Interview by Paul Clark, ElectronicMusic.com, Jan. 2010

External links