no edit summary
(Created page with "thumb|center|200px| '''CGS11''' the '''CGS D/A converter''' board was really developed for Ken Stone's own use, to allow HIS 486 based sequenc...") |
No edit summary |
||
Line 5:
== How to use this module ==
This module is designed to connected to either a 16 or 8 bit bus, and contains two latches that can be latches independently. For a backplane/bus common
While untested, the analog portion of the module should work on 12 volts. The digital portion requires 5 volts.
Line 32:
| 100n||align=right|3
|-
| 10uF 25V
|-
! colspan="2" align=center|Resistors
|