CGS MOTM 101 noise, S&H and vibrato: Difference between revisions

m
add CC-BY-NC (via JWB)
m (Text replacement - "w_/http" to "/http")
m (add CC-BY-NC (via JWB))
Line 5:
 
Ken Stone was not in a position to afford the kit, choosing instead to buy just the printed circuit board as part of a one time special offer Paul made him. For his home use on a budget, he did not feel the use of top quality parts was justified, nor did the 5U form factor of the [[MOTM]] panel suit his needs. The ''vibrato source select'' jumper was also brought out to the front panel as a switch. All components were obtained locally, a challenge at times, and a new panel designed for it.
 
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
 
== See also ==