CGS MOTM 101 noise, S&H and vibrato
This CGS MOTM 101 noise, S&H and vibrato was built from a design by Paul Schreiber.
Ken Stone was not in a position to afford the kit, choosing instead to buy just the printed circuit board as part of a one time special offer Paul made him. For his home use on a budget, he did not feel the use of top quality parts was justified, nor did the 5U form factor of the MOTM panel suit his needs. The vibrato source select jumper was also brought out to the front panel as a switch. All components were obtained locally, a challenge at times, and a new panel designed for it.
CC-BY-NC
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
See also
References
MOTM100 (archived) by Ken Stone, 1999, with permission of the author
External links
- Synthesis Technology MOTM-101 Noise/Sample and Hold