CGS PCB mounting rail: Difference between revisions

← Older edit

CGS PCB mounting rail (view source)

Revision as of 18:43, 19 July 2022

161 bytes added , 1 year ago

m

Text replacement - " (archived) by Ken Stone, 2013, with permission of the author" to " by Ken Stone, 2013, with permission of the author - archived"

VisualWikitext

Rob Kam

Bureaucrats, Administrators

2,154

edits

Revision as of 19:22, 24 May 2019 (view source) Rob Kam (talk \| contribs) (Created page with "thumb\|center\|800px\| '''CGS91''' the '''CGS pcb mounting rail''' for Serge style panels. File:cgs_pcb_cgs91_mounting_rail_dim.gif\|...")		Latest revision as of 18:43, 19 July 2022 (view source) Rob Kam (talk \| contribs) m (Text replacement - " (archived) by Ken Stone, 2013, with permission of the author" to " by Ken Stone, 2013, with permission of the author - archived")
(7 intermediate revisions by 2 users not shown)
Line 1: [[File:cgs_photo_cgs91_mounting_rail2.jpg\|thumb\|center\|800px\|]] '''CGS91''' the '''CGS pcb mounting rail''' for Serge style panels. [[File:cgs_pcb_cgs91_mounting_rail_dim.gif\|thumb\|center\|~~900px~~800px\|Hole positions for the CGS91. The ends both have two holes. It is likely the upper hole will be used for both panel mounting AND holding a PCB as the lower hole is likely to conflict with panel component placement. You may need to choose holes further along the strip to avoid panel mounted pots. Of course, two boards are required per panel, one as the upper mounting rail, and one as the lower.]] {\| class="wikitable" Line 18: == Construction == [[File:cgs_pcb_cgs91_rail.gif\|thumb\|center\|800px\|The CGS91 PCB. Click through for a larger image.]] Before you start assembly, check the board for etching faults. Look for any shorts between tracks, or open circuits due to over etching. Take this opportunity to sand the edges of the board if needed, removing any splinters or rough edges. Line 36 ⟶ 37: \| CGS91 V1.0 PCB\|\|align=right\|2 \|} == CC-BY-NC == Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work. == See also == Line 42 ⟶ 46: == References == * ''[https://web.archive.org/web/~~20180209234737fw_~~20180209234737f/http://www.CGS.synth.net:80/modules/CGS91_mounting_rail.html PCB Mounting Rail for Serge style panels.]'' ~~(archived)~~ by Ken Stone, 2013, with permission of the author - archived == External links == * [http://bompiler.com/pcb/cgs91 CGS91 BOM] at BOMpiler * [http://groups.yahoo.com/group/CGS_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc. === Suppliers === * [https://web.archive.org/web/20181025065512/http://www.elby-designs.com/webtek/~~CGS~~cgs/~~CGS91~~cgs91/~~CGS91_mounting_rail~~cgs91_mounting_rail.htm CGS91 PCB Mounting Rail], revision 1, Elby Designs [[Category:CGS ~~modular~~general and accessories‎]]