CGS Serge 1973 voltage controlled filter: Difference between revisions

m
Text replacement - " (archived) by Ken Stone, 2006, with permission of the author" to " by Ken Stone, 2006, with permission of the author - archived"
(Created page with "thumb|center|600px| '''CGS77''' the '''CGS Serge 1973 voltage controlled filter''' is a licensed adaptation of the original Serge VCF. A stat...")
 
m (Text replacement - " (archived) by Ken Stone, 2006, with permission of the author" to " by Ken Stone, 2006, with permission of the author - archived")
 
(7 intermediate revisions by 2 users not shown)
Line 9:
 
== Construction ==
[[File:cgs_wire_cgs77_vcf.gif|thumb|center|534px|The component overlay and basic wiring for the VCF. The pots are viewed from the rear. No components need be installed in the buffer section (below the thick line) if it is not needed.]]
[[File:cgs_pcb_cgs77_vcf.gif|thumb|center|600px|The component overlay for the VCF.]]
[[File:cgs_photo_cgs77v12_vcf.jpg|thumb|center|800px|Version 1.2 of the PCB. The board is double sided, but the circuit remains unchanged. Some labels have been adjusted. Of note: The frequency pot CW and CCW connections are shown as per the original VCF, i.e. backwards to standard convention. I would suggest you swap these wires!]]
[[File:cgs_photo_cgs77_vcf3.jpg|thumb|right|124px|]] Before you start assembly, check the board for etching faults. Look for any shorts between tracks, or open circuits due to over etching. Take this opportunity to sand the edges of the board if needed, removing any splinters or rough edges. (With the boards supplied by me, the edges are already milled, and etching faults are very rare.)
Line 143 ⟶ 144:
=== Notes ===
* PCB 2" x 6" with four 3mm mounting holes 0.15" in from the edges.
 
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work. Serge Tcherepnin retains all rights to his work.
 
== See also ==
Line 149 ⟶ 153:
 
== References ==
* ''[https://web.archive.org/web/20180209234737fw_20180209234737f/http://www.CGS.synth.net:80/modules/CGS77_vcf.html Serge Voltage Controlled Filter for music synthesizers.]'' (archived) by Ken Stone, 2006, with permission of the author - archived
 
== External links ==
* [http://www.sdiy.org/pinky/tracks/73vcf.mp3 mp3 example of how this filter sounds].
* [http://bompiler.com/pcb/cgs77 CGS77 BOM] at BOMpiler
 
* [http://groups.yahoo.com/group/CGS_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc.
=== Suppliers ===
* [https://web.archive.org/web/20180813204428/http://www.elby-designs.com/webtek/CGScgs/serge/CGS77cgs77/CGS77_vcfcgs77_vcf.html CGS77 1973 VCF], revision 1.2, Elby Designs
* [httphttps://wwwweb.archive.org/web/20190514111746/http://smallbear-electronics.mybigcommerce.com/knobs-1/ Small Bear Electronics], for Davies 1900H style knobs
 
[[Category:CGS modularsignal processors]]