CGS Serge Wilson analog delay: Difference between revisions

← Older edit

CGS Serge Wilson analog delay (view source)

Revision as of 17:28, 15 February 2023

284 bytes added , 1 year ago

Rescuing 2 sources and tagging 0 as dead.) #IABot (v2.0.9.3

VisualWikitext

InternetArchiveBot

Automoderated users, Bots

111

edits

Revision as of 19:19, 16 January 2019 (view source) Rob Kam (talk \| contribs) m ((via JWB)) ← Older edit		Latest revision as of 17:28, 15 February 2023 (view source) InternetArchiveBot (talk \| contribs) (Rescuing 2 sources and tagging 0 as dead.) #IABot (v2.0.9.3)
(6 intermediate revisions by 2 users not shown)
Line 15: When inserting the ICs in their sockets, take care not to accidentally bend any of the pins under the chip. Also, make sure the notch on the chip is aligned with the notch marked on the PCB overlay. Connections to jacks can be established from the schematic diagram and from the [~~http~~https://~~www~~web.archive.org/web/20171130130002/http://serge.synth.net/documents/kit/wad.html Serge Wilson Analog Delay documentation]. == Setup == Line 207: \| MTA-156 header 4 pin\|\|align=right\|1 \|} == CC-BY-NC == Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work. Serge Tcherepnin retains all rights to his work. == See also == Line 213 ⟶ 216: == References == * ''[https://web.archive.org/web/20180214175502/http://www.cgs.synth.net~~:80~~/modules/cgs208_wad.html Wilson Analog delay for music synthesizers.]'' ~~(archived)~~ by Ken Stone, 2001, with permission of the author - archived == External links == * [http://groups.yahoo.com/group/cgs_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc. * [http://bompiler.com/pcb/cgs208 CGS208 BOM] at Bompiler * [~~http~~https://~~www~~web.archive.org/web/20171130130002/http://serge.synth.net/documents/kit/wad.html Wilson Analog Delay], Serge Modular Music Systems [[Category:CGS ~~modular~~modules from other sources]]