Rescuing 2 sources and tagging 0 as dead.) #IABot (v2.0.9.3
m (removed Category:CGS modular; added Category:CGS modules from other sources using HotCat) |
(Rescuing 2 sources and tagging 0 as dead.) #IABot (v2.0.9.3) |
||
(3 intermediate revisions by one other user not shown) | |||
Line 15:
When inserting the ICs in their sockets, take care not to accidentally bend any of the pins under the chip. Also, make sure the notch on the chip is aligned with the notch marked on the PCB overlay.
Connections to jacks can be established from the schematic diagram and from the [
== Setup ==
Line 216:
== References ==
* ''[https://web.archive.org/web/20180214175502/http://www.cgs.synth.net/modules/cgs208_wad.html Wilson Analog delay for music synthesizers.]''
== External links ==
* [http://groups.yahoo.com/group/cgs_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc.
* [http://bompiler.com/pcb/cgs208 CGS208 BOM] at Bompiler
* [
[[Category:CGS modules from other sources]]
|