CGS Serge voltage controlled gain cell (view source)
Revision as of 21:28, 11 January 2019
, 5 years agono edit summary
No edit summary |
No edit summary |
||
Line 44:
== Setup ==
[[File:cgs_schem_cgs108_setup.gif|thumb|center|369px]]
To correctly adjust the CGS108, it needs to be wired into the circuit shown above. It can
A scope is connected to the output. The scope is set to DC, and the beam centered on the screen. Vertical amplification can be set at 2V or 5V per division, and can be adjusted as needed to keep the trace on the screen.
| |||