CGS Serge voltage controlled wave multiplier (view source)
Revision as of 18:00, 15 February 2023
, 1 year agoRescuing 2 sources and tagging 0 as dead.) #IABot (v2.0.9.3
m (Text replacement - "w_/http" to "/http") |
(Rescuing 2 sources and tagging 0 as dead.) #IABot (v2.0.9.3) |
||
(3 intermediate revisions by one other user not shown) | |||
Line 211:
* 330R refers to 330 Ohms. 100nF = 0.1 uF
* PCB is 6" x 2" with 3mm mounting holes 0.15" in from the edges.
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work. Serge Tcherepnin retains all rights to his work.
== See also ==
Line 217 ⟶ 220:
== References ==
* ''[https://web.archive.org/web/20180209234737f/http://www.cgs.synth.net:80/modules/cgs113_vcm.html Serge Wave Multipliers for music synthesizers.]''
{{reflist}}
== External links ==
* [https://web.archive.org/web/20180125124135/http://www.serge.synth.net/documents/kit/vcwm.html VC Wave Multipliers], the original Serge kit instructions.
* [http://groups.yahoo.com/group/cgs_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc.
* [http://bompiler.com/pcb/cgs113 CGS113 BOM] at BOMpiler
=== Suppliers ===
* [https://web.archive.org/web/20181206035342/http://www.elby-designs.com/webtek/cgs/serge/cgs113/cgs113_vcm.html CGS113 Wave Multipliers], revision 1.1, Elby Designs
[[Category:CGS
|