CGS VCA: Difference between revisions

CGS VCA (view source)

180 bytes added , 1 year ago

m

Text replacement - " (archived) by Ken Stone, 2004, with permission of the author" to " by Ken Stone, 2004, with permission of the author - archived"

2,154

edits

Revision as of 15:55, 23 May 2019 (view source) Rob Kam (talk \| contribs) (Created page with "thumb\|center\|800px\| '''CGS64''' the '''CGS VCA''' (voltage controlled amplifier) is suitable for both audio and control voltage modulation....")		Latest revision as of 18:42, 19 July 2022 (view source) Rob Kam (talk \| contribs) m (Text replacement - " (archived) by Ken Stone, 2004, with permission of the author" to " by Ken Stone, 2004, with permission of the author - archived")
(4 intermediate revisions by the same user not shown)
Line 91: * PCB is 1" x 6" with four 3mm mounting holes 0.15" in from the edges. * The board is designed so it may be cut in half and jumpered with a 0.1" header or wire links, so it can be fit behind smaller panels. == CC-BY-NC == Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work. == See also == Line 97 ⟶ 100: == References == * ''[https://web.archive.org/web/~~20180209234737fw_~~20180209234737f/http://www.cgs.synth.net:80/modules/cgs64_vca.html VCA for music synthesizers.]'' ~~(archived)~~ by Ken Stone, 2004, with permission of the author - archived == External links == Line 103 ⟶ 106: * [http://groups.yahoo.com/group/cgs_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc. [[Category:CGS ~~modular~~CV processors]] [[Category:CGS signal processors]]