m
Text replacement - " (archived) by Ken Stone, 2004, with permission of the author" to " by Ken Stone, 2004, with permission of the author - archived"
No edit summary |
m (Text replacement - " (archived) by Ken Stone, 2004, with permission of the author" to " by Ken Stone, 2004, with permission of the author - archived") |
||
| (6 intermediate revisions by the same user not shown) | |||
Line 29:
When inserting ICs into sockets, take care not to accidentally bend any of the pins under the chip. Also, make sure the notch on the chip is aligned with the notch marked on the PCB overlay.
{| class="wikitable"
|+ style="text-align:left"|PCB connections
|-
| LN||to anode of XNOR LED
Line 94 ⟶ 93:
* Substitute 1k5 for the two 1k8 resistors if running from +/-12 volts.
* PCB is 1" x 2" with two 3mm mounting holes 0.15" in from the bottom and edges. It is designed to sit above one end of a regular 2" width CGS PCB.
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
== See also ==
Line 101 ⟶ 103:
== References ==
* [https://web.archive.org/web/
== External links ==
* [http://groups.yahoo.com/group/cgs_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc.
* [http://bompiler.com/pcb/cgs54 CGS54 BOM] at BOMpiler
=== Suppliers ===
* [http://www.elby-designs.com/webtek/cgs/cgs54/cgs54_xor.html CGS54 XOR/NXOR Logic], revision 1.1, Elby Designs
[[Category:CGS
| |||