m
Text replacement - " (archived) by Ken Stone, 2004, with permission of the author" to " by Ken Stone, 2004, with permission of the author - archived"
m (Text replacement - " (archived) by Ken Stone, 2004, with permission of the author" to " by Ken Stone, 2004, with permission of the author - archived") |
|||
(6 intermediate revisions by the same user not shown) | |||
Line 1:
<!-- missing file [[File:cgs_photo_cgs54_xor.jpg|thumb|center|600px]] -->
'''CGS54''' the '''CGS XOR XNOR logic''' board is an add-on for the [[CGS pulse divider and
== A little on how it works ==
Line 26:
When inserting ICs into sockets, take care not to accidentally bend any of the pins under the chip. Also, make sure the notch on the chip is aligned with the notch marked on the PCB overlay.
== Notes ==▼
* PCB is 1.15" x 2" with two 3mm mounting holes 0.15" in from the bottom and edges. It is designed to sit above one end of a regular 2" width CGS PCB.▼
== Parts list ==
Line 64 ⟶ 61:
| CGS54 PCB||align=right|1
|}
▲=== Notes ===
▲* PCB is 1.15" x 2" with two 3mm mounting holes 0.15" in from the bottom and edges. It is designed to sit above one end of a regular 2" width CGS PCB.
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
== See also ==
* [[CGS XOR/XNOR logic]] for the
* [[CGS parts FAQ]]
* [[CatGirl_Synth#The_CGS_modules|The CGS modules]]
== References ==
* [https://web.archive.org/web/
== External links ==
* [http://groups.yahoo.com/group/cgs_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc.
[[Category:CGS
|