m
Text replacement - " (archived) by Ken Stone, 2004, with permission of the author" to " by Ken Stone, 2004, with permission of the author - archived"
No edit summary |
m (Text replacement - " (archived) by Ken Stone, 2004, with permission of the author" to " by Ken Stone, 2004, with permission of the author - archived") |
||
(4 intermediate revisions by the same user not shown) | |||
Line 64:
=== Notes ===
* PCB is 1.15" x 2" with two 3mm mounting holes 0.15" in from the bottom and edges. It is designed to sit above one end of a regular 2" width CGS PCB.
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
== See also ==
* [[CGS XOR/XNOR logic]] for the
* [[CGS parts FAQ]]
* [[CatGirl_Synth#The_CGS_modules|The CGS modules]]
== References ==
* [https://web.archive.org/web/
== External links ==
* [http://groups.yahoo.com/group/cgs_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc.
[[Category:CGS
|