CGS analog shift register (previous version) (view source)
Revision as of 10:36, 7 June 2019
, 4 years agoadd CC-BY-NC (via JWB)
m (Text replacement - "w_/http" to "/http") |
m (add CC-BY-NC (via JWB)) |
||
Line 109:
* A 10 to 22 ohm resistor can be used instead of the ferrite bead. If you don't care about power-rail noise, just use a link instead.
* PCB 6" x 2" with 3mm mounting holes 0.15" in from the edges.
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
== See also ==
|