m
Text replacement - " (archived) by Ken Stone, 2013, with permission of the author" to " by Ken Stone, 2013, with permission of the author - archived"
m (Text replacement - "(Archived)" to "(archived)") |
m (Text replacement - " (archived) by Ken Stone, 2013, with permission of the author" to " by Ken Stone, 2013, with permission of the author - archived") |
||
(7 intermediate revisions by the same user not shown) | |||
Line 21:
* If you have a power bus that uses the MOTM standard for +/-15/+5, you can install a six pin 0.156 header, three Ferrite beads and three 10uF decoupling capacitors.
* If you only have +/-12 volt or +/-15 volt power available, install a four pin 0.156 header, two Ferrite beads, two 10uF decoupling capacitors, two 100n capacitors and a 78M05 (or similar) regulator. Refer to the photographs for component positioning.
== Notes ==▼
* 330R refers to 330 ohms. 100n = 0.1 uF, etc.▼
* The module will work on +/-12 volts or +/-15 volts.▼
* PCB dimensions are 6" x 2" with 3mm mounting holes 0.15" in from the edges.▼
== Parts list ==
Line 32 ⟶ 27:
{|style="border:1px solid #BBB; display:inline-table; margin-right:25px;"
| colspan="2"|Full module using 4 pin power
|-
| Part||align=right|Quantity
Line 60 ⟶ 53:
{|style="border:1px solid #BBB; display:inline-table;"
| colspan="2"|PCB used with 6 pin power
|-
| Part||align=right|Quantity
Line 81 ⟶ 72:
| CGS124 VER1.0 PCB||align=right|1
|}
▲=== Notes ===
▲* 330R refers to 330 ohms. 100n = 0.1 uF, etc.
▲* The module will work on +/-12 volts or +/-15 volts.
▲* PCB dimensions are 6" x 2" (152.40 mm x 50.8 mm) with 3mm mounting holes 0.15" in from the edges.
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
== See also ==
* [[
* [[CGS parts FAQ]]
== References ==
* [https://web.archive.org/web/
== External links ==
* [http://groups.yahoo.com/group/cgs_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc.
=== Suppliers ===
* [http://www.elby-designs.com/webtek/cgs/cgs124/cgs124.htm CGS124 Breadboard/Prototyping Board], Elby Designs
[[Category:CGS
|