m
Text replacement - " - archived" to " - archived"
mNo edit summary |
m (Text replacement - " - archived" to " - archived") Tag: Manual revert |
||
(7 intermediate revisions by 2 users not shown) | |||
Line 72:
* VER1.1 PCB is electrically identical to the REV1 PCB. The only difference is the addition of anchor holes for the wiring.
* A 10 to 22 ohm resistor can be used instead of the Ferrite bead. If you don't care about power-rail noise, just use a link instead.
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
== See also ==
Line 78 ⟶ 81:
== References ==
* ''[https://web.archive.org/web/
== External links ==
* [http://bompiler.com/pcb/cgs24 CGS24 BOM] at BOMpiler
=== Suppliers ===
* [https://web.archive.org/web/20181025065220/http://www.elby-designs.com/webtek/
[[Category:CGS
|