CGS gate to trigger converter: Difference between revisions

← Older edit

CGS gate to trigger converter (view source)

Revision as of 14:50, 19 July 2022

21 bytes added , 1 year ago

m

Text replacement - " - archived" to " - archived"

VisualWikitext

Rob Kam

Bureaucrats, Administrators

2,154

edits

Revision as of 20:42, 29 May 2019 (view source) InternetArchiveBot (talk \| contribs) m (Rescuing 1 sources and tagging 0 as dead. #IABot (v2.0beta15)) ← Older edit		Latest revision as of 14:50, 19 July 2022 (view source) Rob Kam (talk \| contribs) m (Text replacement - " - archived" to " - archived") Tag: Manual revert
(6 intermediate revisions by the same user not shown)
Line 72: * VER1.1 PCB is electrically identical to the REV1 PCB. The only difference is the addition of anchor holes for the wiring. * A 10 to 22 ohm resistor can be used instead of the Ferrite bead. If you don't care about power-rail noise, just use a link instead. == CC-BY-NC == Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work. == See also == Line 78 ⟶ 81: == References == * ''[https://web.archive.org/web/~~20180209234737fw_~~20180209234737f/http://www.CGS.synth.net:80/modules/CGS24_gatetotrigger.html Gate to Trigger Converter for music synthesizers.]'' ~~(archived)~~ by Ken Stone, 2001, with permission of the author - archived == External links == * [http://bompiler.com/pcb/cgs24 CGS24 BOM] at BOMpiler * [http://groups.yahoo.com/group/CGS_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc. === Suppliers === * [https://web.archive.org/web/20181025065220/http://www.elby-designs.com/webtek/cgs/cgs24/cgs24_gatetotrigger.html] CGS24 Gate to Trigger Converter, Elby Designs [[Category:CGS ~~modular~~clock/gate/trigger processors]]