CGS gated comparator: Difference between revisions

m (Text replacement - "Ferrite Bead" to "Ferrite bead")
 
(10 intermediate revisions by 2 users not shown)
Line 44:
[[File:cgs_photo_cgs13v2-2_pcb_rear.jpg|thumb|center|600px|This photo of the rear of the PCB show the positions for the surface mount decoupling capacitors.]]
The LED resistors (RL) can be selected as needed. If you are using common LEDs, 1k to 2k2 would be appropriate. If you are using any of the super-bright modern LEDs for their unique colors, the resistors can be much higher, 10k to 33k for example, so that the LEDs don't dazzle you.
[[File:cgs_panel_comparator.jpg||thumb|right|102px|]]
 
Resistors RA and RB form the voltage divider that determines the gate output voltage. Use 1k for RB. When running off +/-15 volts use 1k8 for RA. When running off +/-12 volts, use RA = 1k5.
 
Line 129:
=== Notes ===
* A 10 to 22 ohm resistor can be used instead of the ferrite bead. If you don't care about power-rail noise, just use a link instead.
 
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
 
== See also ==
Line 136 ⟶ 139:
 
== References ==
''[https://web.archive.org/web/20180209234737fw_20180209234737f/http://www.CGS.synth.net:80/modules/CGS13v2_gated_comparator.html Gated Comparator for music synthesizers.]'' (archived) by Ken Stone, 2001, with permission of the author - archived
 
== External links ==
* [http://bompiler.com/pcb/cgs13 CGS13 v2.2 BOM] at BOMpiler
* [https://github.com/TuesdayNightMachines/CGS-Serge-Modular-Synth/blob/master/CGS%20Gated%20Comparator/CGS%20Gated%20Comparator%20Guide.md CGS Gated Comparator Guide.md], TuesdayNightMachines/CGS-Serge-Modular-Synth, GitHub
* [http://groups.yahoo.com/group/CGS_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc.
=== Suppliers ===
* [https://web.archive.org/web/20180329090944/http://www.elby-designs.com/webtek/CGScgs/CGS13cgs13/CGS13_gated_comparatorcgs13_gated_comparator.html CGS13 Gated Comparator], revision 2.2, Elby Designs
 
[[Category:CGS modularclock/gate/trigger processors]]
[[Category:CGS other original designs]]