CGS gated comparator (previous version): Difference between revisions

CGS gated comparator (previous version) (view source)

21 bytes added , 1 year ago

m

Text replacement - " - archived" to " - archived"

2,293

edits

Revision as of 19:54, 21 May 2019 (view source) Rob Kam (talk \| contribs) m (Text replacement - "for the current version" to "for the latest version") ← Older edit		Latest revision as of 14:50, 19 July 2022 (view source) Rob Kam (talk \| contribs) m (Text replacement - " - archived" to " - archived") Tag: Manual revert
(6 intermediate revisions by the same user not shown)
Line 102: * A 10 to 22 ohm resistor can be used instead of the ferrite bead. If you don't care about power-rail noise, just use a link instead. * If you would rather the inverted CV output (RVI) operated above 0 volts, a resistor can be soldered between pin 2 of the TL072 and the negative rail. Try a value around 47k to 100k. == CC-BY-NC == Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work. == See also == Line 109 ⟶ 112: == References == * ''[https://web.archive.org/web/~~20180209234737fw_~~20180209234737f/http://www.CGS.synth.net:80/modules/CGS13_gated_comparator.html Gated Comparator for music synthesizers]'' ~~(archived)~~ by Ken Stone, 2001, with permission of the author - archived == External links == * [http://groups.yahoo.com/group/CGS_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc. ~~[[Category:CGS modular]]~~ [[Category:CGS clock/gate/trigger processors]]