2,293
edits
m (Text replacement - "w_/http" to "/http") |
m (add CC-BY-NC (via JWB)) |
||
Line 102:
* A 10 to 22 ohm resistor can be used instead of the ferrite bead. If you don't care about power-rail noise, just use a link instead.
* If you would rather the inverted CV output (RVI) operated above 0 volts, a resistor can be soldered between pin 2 of the TL072 and the negative rail. Try a value around 47k to 100k.
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
== See also ==
|