CGS master divider (previous version) (view source)
Revision as of 14:21, 13 January 2019
, 5 years ago(via JWB)
m (Text replacement - "Ferrite Bead" to "Ferrite bead") |
m ((via JWB)) |
||
Line 41:
The inputs to the networks which generate the 90° and 270° outputs are labeled S1 and S2 on the PCB. For each network a two pole, six position rotary switch connects each input to two successive outputs of the divider available via the pads labeled Q1 to Q6. As it does not matter which input of each network is used, it is possible to run a single wire from each "Q" output to the rotary switch, where it is connected to two adjacent pins, the exceptions being for Q1 and Q6 which are connected to a single pin each. Q0 is not used.
'''
{|style="border:1px solid #BBB; display:inline-table; margin-right:25px;"
| PCB||Switch 1
|