m
Text replacement - " (archived) by Ken Stone, 2010, with permission of the author" to " by Ken Stone, 2010, with permission of the author - archived"
(Created page with "thumb|center|600px| '''CGS80''' the '''CGS multi-mixer''' module is a multi-purpose mixer that can be used for both synth-level audio and cont...") |
m (Text replacement - " (archived) by Ken Stone, 2010, with permission of the author" to " by Ken Stone, 2010, with permission of the author - archived") |
||
| (5 intermediate revisions by the same user not shown) | |||
Line 1:
[[File:cgs_photo_cgs80_mix.jpg|thumb|center|600px|]]
'''CGS80''' the '''CGS multi-mixer''' module is a multi-purpose mixer that can be used for both synth-level audio and control voltages. There are eight input channels, each which has AC coupled and DC coupled inputs and a level control. The AC inputs are primarily for audio use, but can be used to remove any DC offset from a control voltage. Only the fast moving portions of the control voltage will be passed.
The eight inputs are then mixed into three different types of output stage.
Line 138 ⟶ 140:
=== Notes ===
* 330R refers to 330 Ohms. 100 nF = 0.1 uF.
* PCB is 6" x 2" with 3mm mounting holes 0.15" in from the edges.▼
▲* The module will work on +/-12 volts.
▲* PCB 6" x 2" with 3mm mounting holes 0.15" in from the edges.
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
== See also ==
Line 146 ⟶ 150:
== References ==
* ''[https://web.archive.org/web/
== External links ==
[[Category:CGS
| |||
