CGS programmer/sequencer (previous version) (view source)
Revision as of 18:42, 19 July 2022
, 1 year agoText replacement - " (archived) by Ken Stone, 2004, with permission of the author" to " by Ken Stone, 2004, with permission of the author - archived"
m (Text replacement - "w_/http" to "/http") |
m (Text replacement - " (archived) by Ken Stone, 2004, with permission of the author" to " by Ken Stone, 2004, with permission of the author - archived") |
||
| (3 intermediate revisions by 2 users not shown) | |||
Line 192:
* PCB is 6" long, mounting off pots at 3/4" centers.
* All type B boards that do not have a revision number have an error. Physically between the two BC557s on the PCB is a 47k resistor. This should be 470k, and will solve problems some of you are having with the common pulse out. Electrically it forms the upper leg of a voltage divider connected to the emitter of lower transistor in the Common Pulse out circuit.
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
== See also ==
Line 199 ⟶ 202:
== References ==
* [https://web.archive.org/web/20170316114221f/http://www.cgs.synth.net:80/modules/cgs59_prog.html Programmer/Sequencer for music synthesizers.]
== External links ==
Line 207 ⟶ 210:
* [http://bompiler.com/pcb/cgs59b CGS59B control board (B) BOM] at BOMpiler
=== Suppliers ===
* [https://web.archive.org/web/20181117104908/http://www.elby-designs.com/webtek/cgs/cgs59/cgs59_prog.html CGS59 8-Step Sequencer], revision 1.1, Elby Designs
[[Category:CGS
| |||