CGS programmer/sequencer (previous version) (view source)
Revision as of 00:02, 16 November 2018
, 5 years agono edit summary
No edit summary |
|||
Line 59:
The skip functionality was developed at the suggestion of and in conjunction with Ryk Thekreator.
== Notes ==▼
* PCB 6" long, mounting off pots at 3/4" centers.▼
* All type B boards that do not have a revision number have an error. Physically between the two BC557s on the PCB is a 47k resistor. This should be 470k, and will solve problems some of you are having with the common pulse out. Electrically it forms the upper leg of a voltage divider connected to the emitter of lower transistor in the Common Pulse out circuit.▼
== Parts list ==
Line 192 ⟶ 188:
| CGS59B PCB||align=right|1
|}
▲=== Notes ===
▲* PCB 6" long, mounting off pots at 3/4" centers.
▲* All type B boards that do not have a revision number have an error. Physically between the two BC557s on the PCB is a 47k resistor. This should be 470k, and will solve problems some of you are having with the common pulse out. Electrically it forms the upper leg of a voltage divider connected to the emitter of lower transistor in the Common Pulse out circuit.
== See also ==
| |||