CGS pulse divider and Boolean logic (previous revisions): Difference between revisions

m
Text replacement - " - archived" to " - archived"
No edit summary
m (Text replacement - " - archived" to " - archived")
Tag: Manual revert
 
(6 intermediate revisions by the same user not shown)
Line 23:
 
== Construction ==
[[File:cgs_pcb_cgs36v13cgs_pcb_cgs36_pulse_divider.gif|thumb|center|600px|The component overlay. ClickRev through for an enlarged printable version1.1.]]
[[File:cgs_pcb_cgs36v13.gif|thumb|center|600px|The component overlay Rev 1.3. Click through for an enlarged printable version.]]
Note: '''On the first run of the PCBs, the 820R and 680R in the AND gate were reversed.''' To get around this they were swapped in assembly. If not one output will be a little lower than the other. This isn't critical.
 
Line 153 ⟶ 154:
* On some boards there is an unmarked capacitor near the power connector. This can be anything in the range of 10n to 100n, and ceramic, or it can be omitted altogether.
* PCB measures 6" x 2" with 3mm mounting holes 0.15" in from the edges.
 
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
 
== See also ==
Line 160 ⟶ 164:
 
== References ==
* [https://web.archive.org/web/20161227161727fw_20161227161727f/http://www.cgs.synth.net:80/modules/cgs36v1_pulse_divider.html Pulse Divider and Boolean Logic for music synthesizers.] (archived) by Ken Stone, 2001, with permission of the author - archived
 
== External links ==
* [http://groups.yahoo.com/group/cgs_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc.
 
[[Category:CGS modularclock/gate/trigger processors]]