Rescuing 1 sources and tagging 0 as dead.) #IABot (v2.0.9.3
(Rescuing 1 sources and tagging 0 as dead.) #IABot (v2.0.9.3) |
|||
(6 intermediate revisions by 2 users not shown) | |||
Line 143:
! colspan="2" align=center|Misc
|-
| Ferrite
|-
| 0.156 4 pin connector||A=0 B=1
Line 158:
* 330R refers to 330 ohms. 100n = 0.1μF.
* PCB is 6" x 1.5" with 3mm mounting holes 0.15" in from the edges. Extra holes are provided to match the CGS91 mounting rails, with left or right offsets, or centered.
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
== See also ==
Line 164 ⟶ 167:
== References ==
* ''[https://web.archive.org/web/
== External links ==
Line 173 ⟶ 176:
* [http://bompiler.com/pcb/cgs95 CGS95 BOM] at BOMpiler
=== Suppliers ===
* [https://web.archive.org/web/20181122000455/http://www.elby-designs.com/webtek/cgs/cgs95/cgs95_rev.html CGS95 Digital Reverb], revision 1, Elby Designs
=== Belton BTDR-2H suppliers ===
* [https://web.archive.org/web/20181112142238/http://www.smallbear-electronics.mybigcommerce.com/belton-btdr-2h-reverb-modules
* [https://www.thonk.co.uk/shop/belton-reverb-brick/ Thonk Ltd.]
[[Category:CGS
|