CGS sequential switch: Difference between revisions

CGS sequential switch (view source)

210 bytes added , 1 year ago

no edit summary

2,154

edits

Revision as of 22:18, 13 January 2019 (view source) Rob Kam (talk \| contribs) (→‎Construction) ← Older edit		Latest revision as of 18:56, 19 July 2022 (view source) Rob Kam (talk \| contribs) No edit summary
(7 intermediate revisions by 3 users not shown)
Line 142: === Notes === * A link be used instead of the ferrite beads if you don't care about power-rail noise. Note that in the schematic the second op amp of the TL072 (the Inverted Out) show wrong pin numbers. 5 and 6 should be swapped. The polarity is right though. == CC-BY-NC == Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work. == See also == Line 149 ⟶ 153: == References == ''[https://web.archive.org/web/~~20180209234737fw_~~20180209234737f/http://www.CGS.synth.net:80/modules/CGS28_seq_switch.html Sequential Switch for music synthesizers.]'' ~~(archived)~~ by Ken Stone, 2001, 2013, with permission of the author - archived == External links == * [http://groups.yahoo.com/group/CGS_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc. === Suppliers === * [https://web.archive.org/web/20180329091015/http://www.elby-designs.com/webtek/~~CGS~~cgs/~~CGS28~~cgs28/~~CGS28_seq_switch~~cgs28_seq_switch.html CGS28 Sequential Switch], revision 2, Elby Designs [[Category:CGS ~~modular~~signal processors]]