no edit summary
m (removed Category:CGS modular; added Category:CGS signal processors using HotCat) |
No edit summary |
||
(3 intermediate revisions by 2 users not shown) | |||
Line 142:
=== Notes ===
* A link be used instead of the ferrite beads if you don't care about power-rail noise.
*Note that in the schematic the second op amp of the TL072 (the Inverted Out) show wrong pin numbers. 5 and 6 should be swapped. The polarity is right though.
== CC-BY-NC ==
Line 152 ⟶ 153:
== References ==
* ''[https://web.archive.org/web/20180209234737f/http://www.CGS.synth.net:80/modules/CGS28_seq_switch.html Sequential Switch for music synthesizers.]''
== External links ==
=== Suppliers ===
* [https://web.archive.org/web/20180329091015/http://www.elby-designs.com/webtek/cgs/cgs28/cgs28_seq_switch.html CGS28 Sequential Switch], revision 2, Elby Designs
|