no edit summary
m (→Notes) |
No edit summary |
||
(One intermediate revision by one other user not shown) | |||
Line 142:
=== Notes ===
* A link be used instead of the ferrite beads if you don't care about power-rail noise.
*Note that in the schematic the second op amp of the TL072 (the Inverted Out) show wrong pin numbers. 5 and 6 should be swapped. The polarity is right though.
== CC-BY-NC ==
Line 153:
== References ==
* ''[https://web.archive.org/web/20180209234737f/http://www.CGS.synth.net:80/modules/CGS28_seq_switch.html Sequential Switch for music synthesizers.]''
== External links ==
|