→Construction
(Created page with "thumb|center|800px| '''CGS120''' the '''CGS utility mounting rail''' is a 6 inch long universal mounting board. When snapped in two, lengthw...") |
|||
Line 3:
== Construction ==
[[File:cgs_pcb_cgs120_ms.gif|thumb|center|800px|The CGS120 PCB. Click through for a larger image.]]
Before you start assembly, check the board for etching faults. Look for any shorts between tracks, or open circuits due to over etching. Take this opportunity to sand the edges of the board if needed, removing any splinters or rough edges. This will most-likely be the case if you have split the board in two along the V-groove.
| |||
