Rescuing 1 sources and tagging 0 as dead.) #IABot (v2.0.9.3
m (Text replacement - "w_/http" to "/http") |
(Rescuing 1 sources and tagging 0 as dead.) #IABot (v2.0.9.3) |
||
(3 intermediate revisions by one other user not shown) | |||
Line 155:
* A 10 to 22 ohm resistor can be used instead of a ferrite bead. If you don't care about power-rail noise, just use a link instead.
* {{font color|red|If using a Motorola chip here, make sure it is the MC14024 and not an MC4024, which is entirely the wrong chip.}}
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
== See also ==
Line 162 ⟶ 165:
== References ==
* [https://web.archive.org/web/20171219235859f/http://www.cgs.synth.net:80/modules/cgs09_vcd.html Voltage Controlled Divider for music synthesizers.]
== External links ==
* [http://groups.yahoo.com/group/cgs_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc.
=== Suppliers ===
* [https://web.archive.org/web/20181203044035/http://www.elby-designs.com/webtek/cgs/cgs09/cgs09_vcd.html CGS09 Voltage Controlled Divider], Elby Designs
[[Category:CGS
|