Frac rack: Difference between revisions

Although both Frac and Euro modules are 3U, use V/octave and have similar signal levels the modules aren't interchangeable. Frac modules are deeper and have a different mounting system. The module power connectors are different and so are the voltages; Frac modules are powered with ±15V and Eurorack with ±12V. Check the specs of individual modules for CV compatibility. To patch between a banana Frac system and a Euro system a common ground connection will need to be made.<ref name="an" /><ref name="faq">{{Cite web |url=http://www.blacet.com/FAQ.html |title=Blacet FAQ |accessdate=2015-06-11 |archiveurl=https://web.archive.org/web/20150212075001/http://www.blacet.com/FAQ.html |archivedate=2015-02-12 |dead-url-status=yesdead }}</ref><ref>[https://web.archive.org/web/20150608175134/http://blacet.com/tech.html Tech Notes], Blacet Research</ref><ref>[http://forum.vintagesynth.com/viewtopic.php?f=5&t=71748 Difference between Frac rack and Euro], Vintage Synth Explorer forum, May 2013</ref><ref>[http://www.elby-designs.com/webtek/panther/euro-frac.pdf EuroSynth – FracRak Comparisons] by Laurie Biddulph, 2015</ref>

Power requirements for Frac modules are typically ±15VDC. Current draw depends on the module. The power connectors are 4 way [[MTA connector|AMP MTA-156]] headers. The [[CV/gate|control voltage]] is 1V/octave.<ref name="measures" /><ref name="an" /><ref name="faq" /> [[PAiA P9700S]] modules are designed for an ±18V unregulated power with on module regulation where necessary, although ±15V regulated supplies can be used.<ref>[http://www.paia.com/p9700s.asp P9700S Series Analog Synthesizer Modules]</ref>