no edit summary
No edit summary |
|||
(4 intermediate revisions by 3 users not shown) | |||
Line 13:
A DuPont crimp consists of two parts, 0.1” (2.54mm) housing and separate metal crimp terminal. The AWG for wire generally used is 22, 24, 26 or 28 (standard ribbon cable) and a maximum diameter of 1.57mm.<ref>Molex data sheet [http://www.molex.com/webdocs/datasheets/pdf/en-us/0008500114_CRIMP_TERMINALS.pdf 08-50-0114]</ref><ref>Molex data sheet [http://www.molex.com/webdocs/datasheets/pdf/en-us/0008520072_CRIMP_TERMINALS.pdf 08-52-0072]</ref>
Using the proper crimping tool makes a good crimp joint easy. A properly crimped joint does not need soldering and is more than strong enough.<ref>[http://renoirsrants.blogspot.co.uk/search/label/Crimping Crimping], by Dave Renoir, 20 October 2011</ref> Most crimp terminals are designed to be crimped, not soldered. Soldering a crimped terminal may weaken the mechanical connection, reduce electrical conductivity, and damage the terminal.
== See also ==
* [[Wire link]]
* [[Jumper]]
* [[
== References ==
Line 26:
* [https://forum.arduino.cc/index.php?topic=376971.0 FYI Making DuPont jumper wires.], Arduino Forum, Feb 2016
* [https://electronics.stackexchange.com/questions/179179/what-is-the-official-name-for-these-jumper-wires/179183#179183 What is the official name for these jumper wires?], StackExchange EE
=== Suppliers ===
* [http://www.mouser.co.uk/Tools-Supplies/Prototyping-Products/Jumper-Wires/_/N-bkrh0 Mouser]
|