Knobs: Difference between revisions

T18 push on knobs fit splined pot shafts. Pots with with round or D shafts require knobs with plain holes that if not push fit, have set screws to hold them in place. Most spline shaft pots have a slightly smaller diameter shaft than round or D shaft. Usually splines are 6mm while most round ones are 1/4" (6.35mm). So 1/4" setscrew knobs will end up slightly lopsided when tightened onto a 6mm spline shaft. Knobs fastened by a collet require a box spanner to fasten them.<ref>[https://www.muffwiggler.com/forum/viewtopic.php?t=54215&sid=0c1a5b9d1c9d353c1a8e025489dcf6ac knurled vs round shaft pots], Muff Wiggler forum, March 2012</ref><ref>Wikipedia: [https://en.wikipedia.org/wiki/Control_knob Control knob]</ref> Note that knobs to suit D shafts come with different pointer orientations.<ref>[http://mutable-instruments.net/forum/discussion/4065/shruthi-knob-specs/p1 Shruthi Knob Specs], Mutable Instruments forum, Oct 2013</ref>