==Panels/Faceplates==
===MOTM Panels===
====MOTM Panel Specs====
...
====MOTM Blank Panels====
Blank panels can be purchased from:
* Bridechamber: http://bridechamber.com (1, 2, 3, and 4 U)
* Synthesis Technology: http://www.synthtech.com (1 and 2 U)
====MOTM Project Panels====
Panels for specific projects (CGS, I. Fritz, etc.) can be purchased from:
* Bridechamber: http://bridechamber.com
====MOTM Custom Panels====
Custom panels can be manufactured by:
* The Beast: http://www.thebeast.co.uk/cnc/
* Front Panel Express [US]: http://www.frontpanelexpress.com
* Schaeffer [EU]: http://www.schaeffer-ag.de
===MU Panels===
====MU Panel Specs====
==Panels Parts==
===MOTM Panel Parts===
A very extensive list can be found here:
http://www.hotrodmotm.com/parts_list.htm
====MOTM Knobs====
MOTM uses ALCO PKES90B1/4 knobs.
Available at:
* Synthesis Technology: http://www.synthtech.com
====MOTM Potentiometers====
MOTM uses Spectrol 149 pots.
Available at:
* Synthesis Technology: http://www.synthtech.com
====MOTM Switches====
NKK toggle switches with bat handles are the closest fit. <ref>[http://www.hotrodmotm.com/parts_list.htm www.hotrodmotm.com] parts list</ref>
* SPDT: NKK #M2102ES1W01 (Allied: 870-8646)
* SPDT center off: NKK #M2103ES1W01 (Allied: 870-8647)
* DPDT: NKK #M2022ES1W01 (Allied: 870-8652)
* DPDT center off: NKK M2023ES1W01 (Allied: 870-8653)
====MOTM Jacks====
MOTM uses Switchcraft 112A 1/4" jacks.
====MOTM LEDs====
MOTM uses 5mm flat-lens LEDs.
* Red: Lumex #SSI-LXH387ID (DigiKey: 67-1155-ND)
* Green: Lumex #SSI-LXH387GD (DigiKey: 67-1156-ND)
* Yellow: Lumex #SSI-LXH387YD (DigiKey: 67-1157-ND)
===MU Panel Parts===
====MU Knobs====
==PCB/Panel Mounting==
===MOTM PCB Mounting===
MOTM PCBs are generally mounted perpendicular to the panel with L-shaped brackets affixed to pots or jacks.
Available at:
* Bridechamber: http://bridechamber.com/Brackets.html
* Synthesis Technology: http://www.synthtech.com (Stooge brackets)
Details on Stooge brackets: http://www.wiseguysynth.com/larry/brackets/modular_brackets.htm
===MU PCB Mounting===
http://www.aaronsmachinescrews.com/cfusion/DisplayProduct.cfm?ITEM=1701SN1368
For perpendicular mounting, brackets as mentioned in the [[MOTM sectionDIY resources]] can be used, or threaded right-angle brackets (Mouser: 534-621) can be mounted to the panel, using the same screws mentioned above. <ref>http://guitarfool.com/modules/hardware.html</ref>
==Internal Connectors==
===MOTM Connectors===
====MOTM Module Power====
MOTM modules and power distribution boards are connected using 4-pin MTA-156 connectors.
Pinout:
* 1 = +15V
* 2 = GND
* 3 = GND
* 4 = -15V
Female cable mount: 640426-4 (Mouser: 571-640-4264)
Male PCB mount: 640445-4 (Mouser: 571-6404454)
These MTA connectors use 18 awg wire.
===MU Connectors===
===Online resources===
DIY builder sites:
* http://pugix.com/synth/ (MOTM)
* http://guitarfool.com/modules/index.html (MU)
* http://www.dragonflyalley.com/billAndWillMOTMSynth.htm (MOTM)
===Muffwiggler threads===
{{reflist}}
[[Category:5UMU]]
|