no edit summary
No edit summary |
No edit summary |
||
Line 1:
'''PCB layout design''' is possible with tape and dry transfers, or permanent marker pen however [[Electronic design automation|EDA]] software will offer schematic capture, PCB layout, ERC (electrical rule checks), DRC (design rule checks) and other features, e.g. simulating the circuit with [[SPICE]].<ref>PCB design, [http://www.ladyada.net/library/pcb/software.html Software options], ladyada.net</ref><!-- Wikibooks' Practical Electronics [http://en.wikibooks.org/wiki/Practical_Electronics/PCB_Layout PCB Layout] and [http://en.wikibooks.org/wiki/Practical_Electronics/PCB_Layout/Trace_Current_Capacity Trace Current Capacity].
== Standard device prefixes ==
https://en.wikipedia.org/wiki/Reference_designator Standard Device Prefixes
===Best Practices===-->
Line 6:
== References ==
{{reflist}}
== Further reading ==
* ''The Circuit Designer's Companion'' by Peter Wilson, Newnes, 2012, ISBN
* ''[http://frank.harvard.edu/aoe/ The Art of Electronics]'', by Paul Horowitz and Winfield Hill ISBN
* ''How to Design and Make Your Own PCBs'' by R. Penfold, Babani, 1983, ISBN
* ''Fabricating Printed Circuit Boards''' by Jon Varteresian, Newnes, 2002, ISBN
* ''Build Your Own Printed Circuit Board'' by Al Williams, Tab, 2003, ISBN
* ''[http://www.magazines007.com/emag/pub/PCBD-Nov2013/?page=28 Thermal Design: Still a Process Pinch Point?]'' by Dr. John Parry CEng, The PCB Design Magazine, November 2013, p. 28
<!--==Externallinks ==-->
[[Category:PCB]]
|