Regulatory issues: Difference between revisions

no edit summary
No edit summary
No edit summary
Line 1:
 
'''Very few consumers of music gear realize the complex, difficult, ever-changing nature of manufacture of music electronics. Simply putting a circuit-board in a box and offering it for sale is not a viable possibility in the 21st century, due to a lengthy list of factors evolving from government regulations. Not only do nearly all industrialized countries have regulations and court-case precedent covering electrical safety, the issues of RFI (radio-frequency interference) and EMC (electromagnetic compatibility) must be considered. EMC is a major issue for any electronic device sold with a microprocessor inside. And the enactment of ROHS laws by the European Union in 2006 severely restricts the types of materials that a manufacturer can use in an electronic product.'''
 
Line 9 ⟶ 8:
The main issue: bringing AC mains voltages into the product's cabinet. Any electronic device that uses more than one or two watts of power usually must be powered from AC mains. AC mains power varies all over the world, complicating the design of music electronics. In the US, Canada, most of North America, and a few other countries, wall-socket AC mains is 120 volts at 60 Hz frequency. In Japan, it is usually 100 volts, at either 50 Hz or 60 Hz (some utilities in Japan use 50 Hz, some 60). In most of Europe, the standard is 230 volts at 50 Hz. In the UK it is 240v at 50 Hz. The European voltage is very commonplace throughout Europe, Asia, Australasia, and Africa. Some countries, such as Brazil, have failed to standardize. Safety is an important issue with such voltages, as all of them are more than ample to electrocute and kill an adult human, if contacted in the proper way (current discharge via the chest and heart). Wikipedia has a very good article about [http://en.wikipedia.org/wiki/Mains_electricity_by_country mains voltages by country], complete with a map.
 
Also note that the power plugs differ greatly around the world. If only two-wire unearthed power is needed (typical for small appliances), a single 2-pin plug works throughout Europe and in many other countries---the CEE 7/16 "Europlug". If 3 pins are needed for earthing, there are three incompatible standard plugs in the same area of Europe. The most common, the French/German version, is incompatible with the Italian, Swiss, and Scandinavian versions. And there are two different-sized Italian plugs. Australasia and Israel have their own, incompatible plugs and sockets. The American 2-pin plug (NEMA 1-15) and 3-pin plug (NEMA 5-15) are also used in Japan and most of the Americas--usually in countries having 120v power. The old British BS546 plug is still used in India and much of Africa, while the UK itself now uses a totally different plug (BS1363). Argentina uses the Australian plug, but with "line" and "neutral" connections reversed. Some countries, such as China and Brazil, cannot agree on a single standard. Wikipedia has a [http://en.wikipedia.org/wiki/AC_power_plugs_and_sockets good overview] of different power plugs. Thanks to Internet dealers, a company selling music gear is prone to end up selling the same gear in many countries, complicating design greatly. There is a proposal to [http://en.wikipedia.org/wiki/IEC_60906-1 standardize] European power outlets, which has apparently failed as of 2011. This nightmare is why manufacturers needing AC mains inside the product have standardized on the "universal" AC mains inlet socket officially called [http://en.wikipedia.org/wiki/IEC_60320 "IEC 60320"], and left the procurement of a matching AC mains power cord to the consumer or local dealer. And for smaller devices, an AC adapter producing low-voltage AC or DC power is almost universal. Once again, providing the proper AC adapter is left to the local dealer or to the consumer. If you purchase a product made in another country via a website dealer, you have to be aware of this, and willing to find the proper cable or adapter.
 
Thanks to Internet dealers, a company selling music gear is prone to end up selling the same gear in many countries, complicating design greatly. There is a proposal to [http://en.wikipedia.org/wiki/IEC_60906-1 standardize] European power outlets, which has apparently failed as of 2011. This nightmare is why manufacturers needing AC mains inside the product have standardized on the "universal" AC mains inlet socket officially called [http://en.wikipedia.org/wiki/IEC_60320 "IEC 60320"], and left the procurement of a matching AC mains power cord to the consumer or local dealer. Most modern equipment either has a transformer tap switch that the consumer must adjust for his AC mains voltage, or it contains a "universal" switching power supply that can accept and work on anything from 90v to 264v, with no adjustment.
 
And for smaller devices, an AC adapter producing low-voltage AC or DC power is almost universal. Most of them are made for 120v or 230v only, and usually can't be adjusted. (Most modern DC-output ones are "universal input", but some are still being sold that are not self-adjusting.) Once again, providing the proper AC adapter is left to the local dealer or to the consumer. If you purchase a product made in another country via a website dealer, you have to be aware of this, and willing to find the proper cable or adapter. Usually it is impossible or very difficult to buy an adapter or power cable for one country in another country.
 
The moment you feed AC mains into a box, EU regulation EN 60950 of Directive 2006/95/EC, or "Low Voltage Directive For Information Equipment" takes over. It deals with safety in electronic "information" devices powered from AC mains. This regulation is considered to cover music electronics, analog or digital, simply because there is no direct regulation for music gear---sales figures are not sufficient to regulate, and music gear is considered "professional" equipment as opposed to a kind of "home appliance", so music devices are stuck under "information equipment". If it had been considered a "home appliance", a synthesizer would be regulated under EN60335 instead.
Anonymous user