Added info about the gate / trig toggle switch on new versions.
Exeterdown (talk | contribs) (→Normalisations: added a new photo and clarified functions in new versions of the module) |
Exeterdown (talk | contribs) (Added info about the gate / trig toggle switch on new versions.) |
||
Line 15:
Note that there are no attenuator knobs to set the amount of modulation for the ADBDR envelope CV inputs allowing for direct connection to velocity CV or CC#. However when modulated from other sources they might need extra CV processing to set the modulation levels properly.<ref name="rh" />
=== Gate or Trig Toggle ===
New versions of the module feature a toggle switch to select between GATE or TRIG modes. When using long pulses or 'gates' as inputs the envelope will pause at the break level while the gate is high, and continue when the gate is low. Toggle mode will simply run through all stages of the function without interruption. <!-- Need to clarify this with testing or Rob. -->
=== ENV B ===
| |||