Rob Hordijk OSC HRM: Difference between revisions

 

<b>Triple-Input 24DB Filter</b><br>

As the input jacks are normalized the filter can also be used to create a variable slope for one input signal. As when a signal is connected to only the LP input the normalization passes the signal on to the next HP and BP inputs. This way you can set the slope with the LP, HP and BP input level controls.

 

When the LP and HP inputs are used for the same signal they can pass this signal unaltered at specific mizer settings, as the LP nad HP slope are fully complementary, in this case it will even suppress the resonant peak, although that peak wíll be present on the BP input signal."

 

 

Faceplate = Dotcom but can be terminated to MOTM power and drilled accordingly. Cannot be resized, as is the case with all his modules except the Dual Phaser. The Dual Phaser can be made at the standard MOTM size.