Revision as of 22:57, 21 June 2011 (view source) m>Spinningspark (Links in lede bolded title term should be avoided per MOS:BOLDTITLE) ← Older edit		Revision as of 20:52, 10 August 2011 (view source) m>Lightbot (mostly units) Newer edit →
Line 4: SWG was fixed by [[Order of Council]] August 23, 1883. It was constructed by improving the [[Birmingham Wire Gauge]]. It was made legal standard March 1, 1884 by the British [[Board of Trade]]. The basis of the system is the [[Thou_(length)\|mil]], or 0.~~001[[inch\|in]]~~001in. No. 7/0, the largest size, is 0.50 in. (500 mils or 12.7 mm) in diameter, and the smallest, No. 50, is 0.001 in. (1 mil or about 25 µm) in diameter. Between each gauge, the weight diminishes by approximately 20%. Because the weight per unit length is related to the area, and therefore the square of the diameter, the diameter diminishes by approximately 10.6%: :<math>\mbox{Diameter Ratio} = 1-(1-0.2)^{\frac{1}{2}} \approx 10.6%</math>

Standard wire gauge: Difference between revisions

Standard wire gauge (view source)