m
Text replacement - " (archived) by Ken Stone, 1999, with permission of the author" to " by Ken Stone, 1999, with permission of the author - archived"
(Created page with "left|102px thumb|right|202px| File:cgs_motm100.gif|thumb|left|102px|Panel artwork. Click through for larger ver...") |
m (Text replacement - " (archived) by Ken Stone, 1999, with permission of the author" to " by Ken Stone, 1999, with permission of the author - archived") |
||
| (5 intermediate revisions by the same user not shown) | |||
Line 2:
[[File:cgs_photo_motm100.jpg|thumb|right|202px|]]
[[File:cgs_motm100.gif|thumb|left|102px|Panel artwork. Click through for larger version. Print at 200 DPI.]]
This '''CGS MOTM 101 noise, S&H and vibrato''' was built from a design by [[Paul
Ken Stone was not in a position to afford the kit, choosing instead to buy just the printed circuit board as part of a one time special offer Paul made him. For his home use on a budget, he did not feel the use of top quality parts was justified, nor did the 5U form factor of the [[MOTM]] panel suit his needs. The ''vibrato source select'' jumper was also brought out to the front panel as a switch. All components were obtained locally, a challenge at times, and a new panel designed for it.
== CC-BY-NC ==
Readers are permitted to construct these circuits for their own personal use only. Ken Stone retains all rights to his work.
== See also ==
Line 11 ⟶ 14:
== References ==
''[https://web.archive.org/web/
== External links ==
* Synthesis Technology [https://web.archive.org/web/20020410082819/http://synthtech.com/motm101.html MOTM-101 Noise/Sample and Hold]
[[Category:CGS modules from other sources]]
| |||
