CGS MOTM 101 noise, S&H and vibrato

This CGS MOTM 101 noise, S&H and vibrato was built from a design by Paul Scheiber.

Panel artwork. Click through for larger version. Print at 200 DPI.

Ken Stone was not in a position to afford the kit, choosing instead to buy just the printed circuit board as part of a one time special offer Paul made him. For his home use on a budget, he did not feel the use of top quality parts was justified, nor did the 5U form factor of the MOTM panel suit his needs. The vibrato source select jumper was also brought out to the front panel as a switch. All components were obtained locally, a challenge at times, and a new panel designed for it.

See also

• The CGS modules
• CGS parts FAQ

References

MOTM100 (archived) by Ken Stone, 1999, with permission of the author

External links

• Synthesis Technology MOTM-101 Noise/Sample and Hold
• CGS Synth discussion group, for discussion of locating parts, modifications and corrections etc.