CGS Serge Wilson analog delay: Difference between revisions

Jump to navigation Jump to search
Content added Content deleted
VisualWikitext
m (Text replacement - " - archived" to " - archived")
Tag: Manual revert
(Rescuing 2 sources and tagging 0 as dead.) #IABot (v2.0.9.3)
 
Line 15: Line 15:
When inserting the ICs in their sockets, take care not to accidentally bend any of the pins under the chip. Also, make sure the notch on the chip is aligned with the notch marked on the PCB overlay.
When inserting the ICs in their sockets, take care not to accidentally bend any of the pins under the chip. Also, make sure the notch on the chip is aligned with the notch marked on the PCB overlay.


Connections to jacks can be established from the schematic diagram and from the [http://www.serge.synth.net/documents/kit/wad.html Serge Wilson Analog Delay documentation].
Connections to jacks can be established from the schematic diagram and from the [https://web.archive.org/web/20171130130002/http://serge.synth.net/documents/kit/wad.html Serge Wilson Analog Delay documentation].


== Setup ==
== Setup ==
Line 221: Line 221:
* [http://groups.yahoo.com/group/cgs_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc.
* [http://groups.yahoo.com/group/cgs_synth CGS Synth discussion group], for discussion of locating parts, modifications and corrections etc.
* [http://bompiler.com/pcb/cgs208 CGS208 BOM] at Bompiler
* [http://bompiler.com/pcb/cgs208 CGS208 BOM] at Bompiler
* [http://www.serge.synth.net/documents/kit/wad.html Wilson Analog Delay], Serge Modular Music Systems
* [https://web.archive.org/web/20171130130002/http://serge.synth.net/documents/kit/wad.html Wilson Analog Delay], Serge Modular Music Systems


[[Category:CGS modules from other sources]]
[[Category:CGS modules from other sources]]
Retrieved from "https://sdiy.info/wiki/CGS_Serge_Wilson_analog_delay"